Charger the battery Simple Guidelines

Charger the battery Simple Guidelines Charger the battery Simple Guidelines A charger designed to service NiMH batteries can also accommodate NiCd’s, but not the other way around. A charger only made for the NiCd batteries could overcharge the NiMH battery. While many charge methods exist for nickel-based batteries, chargers for lithium-based batteries are more defined in terms of charge method and charge time. This is, in part, due to the tight charge regime and voltage requirements demanded by these batteries. There is only one way to charge Li-ion/Polymer batteries and the so-called ‘miracle chargers’, which claim to restore and prolong battery life, do not exist for these chemistries. Neither does a super-fast charging solution apply. The pulse charge method for Li-ion has no major advantages and the voltage peaks wreak havoc with the voltage limiting circuits. While charge times can be reduced, some manufacturers suggest that pulse charging may shorten the cycle life of Li-ion batteries. Fast charge methods do not significantly decrease the charge time. A charge rate over 1C should be avoided because such high current can induce lithium plating. With most packs, a charge above 1C is not possible. The protection circuit limits the amount of current the battery can accept. The lithium-based battery has a slow metabolism and must take its time to absorb the energy. Lead acid chargers serve industrial markets such as hospitals and health care units. Charge times are very long and cannot be shortened. Most lead acid chargers charge the battery in 14 hours. Because of its low energy density, this battery type is not used for small portable devices. In the following sections various charging needs and charging methods are studied. The charging techniques of different chargers are examined to determine why some perform better than others. Since fast charging rather than slow charging is the norm today, we look at well-designed, closed loop systems, which communicate with the battery and terminate the fast charge when certain responses from the battery are received. more info:http://www.good-battery.co.uk if you have any questions,pls feel free to contact www.good-battery.co.uk

Article Source: http://www.articlepros.com